|
European hardware -lever locks, profile cylinders specific for European locks. European lock picks and European locks.
 by lock-ed » 19 Nov 2010 2:25
First, I know safe-locks belong in the advanced section, but I am not disussing how to open it, simply asking for ID. Hope that is not in conflict with the rules  I have come across two data-safes, made by Bössinger, Germany. One is open, and contains this lock. The other is locked(lost key), and I would like to open it. The locks are most likely of same model, but I have been unable to identify it yet. However, I have been tipped that it might be a LAMPERTZ, but not knowing which model. I plan to either pick it with a 2-1, or decode it   Sorry about the blurry image,  Brgds, Ed  The rule of the six P´s: Proper Planning Prevents Piss Poor Performance
-
lock-ed
-
- Posts: 189
- Joined: 15 Feb 2007 16:36
- Location: Norway
by aussielocky » 23 Nov 2010 17:16
The cap off would help.
I would guess Stuv at first glance.
-
aussielocky
-
- Posts: 279
- Joined: 7 Jun 2007 20:55
by lock-ed » 24 Nov 2010 16:16
Thx for your reply, will post pictures tomorrow. Also, the key resembles a STUV.
Again, thx,
will be back shortly.
Brgds,
Ed
The rule of the six P´s: Proper Planning Prevents Piss Poor Performance
-
lock-ed
-
- Posts: 189
- Joined: 15 Feb 2007 16:36
- Location: Norway
by lock-ed » 24 Nov 2010 16:35
This is an upside down-picture, but should give an idea of what the levers look like. http://i55.tinypic.com/rqye50.jpgAs mentioned, the head of the key resembles a STUV. thx in advance, Ed Last edited by Squelchtone on 24 Nov 2010 18:05, edited 1 time in total.
Reason: tiny pic my butt..
The rule of the six P´s: Proper Planning Prevents Piss Poor Performance
-
lock-ed
-
- Posts: 189
- Joined: 15 Feb 2007 16:36
- Location: Norway
by lock-ed » 24 Nov 2010 16:39
Ooops, sorry for the x-large picture  Ed The rule of the six P´s: Proper Planning Prevents Piss Poor Performance
-
lock-ed
-
- Posts: 189
- Joined: 15 Feb 2007 16:36
- Location: Norway
by lock-ed » 25 Nov 2010 15:20
Here is a shot of the internals, as well as the head of the key. It looks very much like my STUV.keys.  Good inputs are very welcome Ed The rule of the six P´s: Proper Planning Prevents Piss Poor Performance
-
lock-ed
-
- Posts: 189
- Joined: 15 Feb 2007 16:36
- Location: Norway
by aussielocky » 27 Nov 2010 7:46
Maybe an old Mauer ........... The levers don't ring a bell for me.
-
aussielocky
-
- Posts: 279
- Joined: 7 Jun 2007 20:55
by Al » 28 Nov 2010 14:13
Old Mauer
Maybe 71071
Alan Morgan Master Locksmiths.
Experts in Locks and Safes.
-
Al
-
- Posts: 241
- Joined: 13 Oct 2004 3:31
- Location: Nottingham/Derby
by lock-ed » 29 Nov 2010 12:54
Al, thank you very much for your information Planning to make a decoder and variable key for it. Will post further progress in the advanced forum, if I get access later on. Thx again, Ed The rule of the six P´s: Proper Planning Prevents Piss Poor Performance
-
lock-ed
-
- Posts: 189
- Joined: 15 Feb 2007 16:36
- Location: Norway
by Jord Knaap » 3 Mar 2016 13:58
lock-ed wrote:First, I know safe-locks belong in the advanced section, but I am not disussing how to open it, simply asking for ID. Hope that is not in conflict with the rules I have come across two data-safes, made by Bössinger, Germany. One is open, and contains this lock. The other is locked(lost key), and I would like to open it. The locks are most likely of same model, but I have been unable to identify it yet. However, I have been tipped that it might be a LAMPERTZ, but not knowing which model. I plan to either pick it with a 2-1, or decode it Sorry about the blurry image, Brgds, Ed
This a Mauer 6253 lock they did not put a name on the lock because it was so cheap. Thay made the lock in differend vertions 7,8 and 9 levers
-
Jord Knaap
-
- Posts: 3
- Joined: 24 Dec 2004 5:52
- Location: the Netherlands
-
Return to European Locks, Picks and Hardware
Who is online
Users browsing this forum: No registered users and 6 guests
|
