I've had time to play a bit, here are 5 locks I took apart to make cutaways :
(I put links instead of pictures because they are pretty big)
Bricard Supersureté :
It's a "kidda" wafer lockwith a 3 blades key. Wafers are pushed by a ball bearing, which can be on top, right or bottom of keayway.
On the picture, the red parts are from a lock that uses a key with a moving ball bearing in one place (there is no ball in the lock at that place, it's the one just before the end)
The yellow part uses a different keyway and the key has no ball bearing in it (the one place where a ball is missing is just because it's lost during breakdown)
http://frenchkey.fr/s5g7g8f5z1e25fgf5ezef/Autopsie_Bricard_Supersurete_MrJack.jpg
Here is a zoomed view of a slice so you can clearly see what's happening
http://frenchkey.fr/s5g7g8f5z1e25fgf5ezef/Autopsie_Bricard_Supersurete_Zoom_MrJack.jpg
Fontaine 5 pumps
This one is masterkeyed, that's why there can be 2 notches instead of 1. Nothing fancy, works like a Bramah lock basically.
http://frenchkey.fr/s5g7g8f5z1e25fgf5ezef/Autopsie_Fontaine_MrJack.jpg
ISEO Cavers Cavith
This one was tricky to take apart, a lot of pieces, not meant to be taken apart, several sealed parts... Anyway, an interesting one, with 5 "pumps" (pins actually) + 3 pins, all 8 being security pins (Key pins and Drivers pins), and impressive anti-drilling materials (pins, shields, rods...)
http://frenchkey.fr/s5g7g8f5z1e25fgf5ezef/Autopsie_ISEO_Cavers_Cavith_MrJack.jpg
Laperche Rols (6 pumps)
Works like a Bramah lock, nice anti-picking but not so hard to pick though
http://frenchkey.fr/s5g7g8f5z1e25fgf5ezef/Autopsie_Laperche_Rols_MrJack.jpg
Laperche GemmCode 5
Classic 5 pins cylinder, but the cam will not turn on external side unless you push and keep pushed the 2 side rods (center in the picture). You can see that the 2 cores are not the same from the back and the key has a side milling at the tip (not very clear on the picture but you can see it a little).
http://frenchkey.fr/s5g7g8f5z1e25fgf5ezef/Autopsie_Laperche_GemmCode_MrJack.jpg
I hope you like it
