Picked all the easy locks and want to step up your game? Further your lock picking techniques, exchange pro tips, videos, lessons, and develop your skills here.
by liquidsg » 3 Jan 2005 16:16
Hey guys, I'm new here and am also new to lock picking. I read through the different things but am still really clueless, however, my problem does not seem to be covered in here. I have a wardrobe closet that actually houses my TV set, dvd player, tivo unit, etc. I locked it recently because of a house party I had seeing that I didn't want anything ruined or taken. Now, it seems that I have lost the key and I can't get it open! It seems to be a very simple lock, it was not made for security but more decor. It has the normal skeleton key opening (circle on top with the line going down). Only other thing is that it has a little point in there (the key had a hole that the point fit in). I really don't know how to get past it and don''t really have any lock picking tools. Any help is appreciated and I may be able to get a picture if needed. Thanks in advance!
-
liquidsg
-
- Posts: 5
- Joined: 3 Jan 2005 16:09
by fugi » 3 Jan 2005 16:49
well do you remember what the key looked like? did it have several different cuts on it, making it look jagged or stepped? or was it just a solid piece sticking off, kinda looking like a handcuf key?
-
fugi
-
- Posts: 70
- Joined: 30 Dec 2004 15:46
- Location: austin, tx
-
by toomush2drink » 3 Jan 2005 16:57
A small L shaped peice of wire should open this lock or maybe 2 together.
-
toomush2drink
-
- Posts: 1966
- Joined: 26 Mar 2004 15:56
- Location: UK london
by Rockford » 3 Jan 2005 18:51
I've had a few of these recently, and they can be buggers to open due to the restricted keyways. These can be single levers, or multiple levers.
As Toomush says, try L shaped wires first. I've had more success using dental picks though.
Rockford.....
-
Rockford
-
- Posts: 455
- Joined: 27 Mar 2004 17:42
- Location: North Derbyshire / South Yorkshire
by liquidsg » 3 Jan 2005 20:08
only thing is, the pin blocks me from getting much in there..ill try an L wire or so...
-
liquidsg
-
- Posts: 5
- Joined: 3 Jan 2005 16:09
by Eagle » 3 Jan 2005 20:43
If you have a digital camera, it would help us more so we can see what it looks like, but so far, your explanations have been detailed.
Remember, you can make tools out of almost anything, so long as they are tough enough not to break in the keyhole. For a pick, you can use a safety pin and bend the tip a little. You can file it down to make it thinner to get past that tricky pin. For a tension wrench, you can use spring steel from a windshield wiper blade or anything else that comes to mind. If you are unsure of how lock picking works, you can see the basics on
http://ibs.howstuffworks.com/ibs/sac/lock-picking6.htm
Go through the animated slide show.
Let us know if you encounter any more problems.
-
Eagle
-
- Posts: 37
- Joined: 18 Dec 2004 16:25
- Location: California
by liquidsg » 3 Jan 2005 21:54
Ok, I have used many different household picks, but my main problem is this stupid pin! It won't let me make a full rotation in the lock itself. Thinking about the key, I think it was a solid thing with no notches. Also, I have a picture which isnt the best of quality but should give you all the idea of what I am working with...
[img=http://img87.exs.cx/img87/2742/cimg03349wm.th.jpg]
-
liquidsg
-
- Posts: 5
- Joined: 3 Jan 2005 16:09
by David_Parker » 3 Jan 2005 21:57
Do me a favor, retake the photo, focusing, and instead of using the flash, try using a small flashlight to expose the wards and the inside of the lock itself.
Then we'll go from there.
-Dave.
Never underestimate the half-diamond.
-
David_Parker
-
- Posts: 307
- Joined: 22 Jul 2003 3:16
- Location: DFW, TX
by _Ethereal_ » 3 Jan 2005 22:06
That looks like a simple single lever lock.
What you have to do is make 2 lever picks out of coat hangers. - search the euro lock section for pictures of them.
seing as the bolt withdrwas from turning the key clock wise, put the tension tool inup side down, so that the point is facing the bottom of the keyway, then turn it as you would to the key and get the pick to put tension on the talon ( the notch in the bolt that that the tip of the key turns when you open the lock )
use the pick to lift the lever(s) up and the lock will open .
Hope this helps, and if you really need a video i will make one and send it to you.
-
_Ethereal_
-
- Posts: 138
- Joined: 26 Dec 2004 18:41
- Location: Australia
by liquidsg » 3 Jan 2005 22:09
a vid would be usefull, however, i'm going to try what you said and report back.
-
liquidsg
-
- Posts: 5
- Joined: 3 Jan 2005 16:09
by _Ethereal_ » 3 Jan 2005 22:18
i have the video, i will send it to your email if you want it along with the instructions to pick - i wasn't very explainative due to the memory left on the camera
-
_Ethereal_
-
- Posts: 138
- Joined: 26 Dec 2004 18:41
- Location: Australia
by _Ethereal_ » 3 Jan 2005 22:33
Or if anyone would be so kind to host my video, that would help too.
-
_Ethereal_
-
- Posts: 138
- Joined: 26 Dec 2004 18:41
- Location: Australia
by Eagle » 9 Jan 2005 14:34
I wonder if the guy ever opened the lock 
-
Eagle
-
- Posts: 37
- Joined: 18 Dec 2004 16:25
- Location: California
by liquidsg » 13 Jan 2005 22:45
lol still having trouble, its been awhile since ive seen my tv...maybe ill hire somebody to do it
-
liquidsg
-
- Posts: 5
- Joined: 3 Jan 2005 16:09
by fugi » 13 Jan 2005 22:57
ehh.. you know since it just had one not comming off of it, you may be able to aquire a replacement key that'll work with it. or get more creative with your tools. failing that, I'd pry the thing open, I can't go without TV.
no tv no beer make homer something something...
go crazy?
Don't mind if I DO! WWYYAAA!
Anyone who becomes master of a city accustomed to freedom and does not destroy it may expect to be destroyed by it; for such a city may always justify rebellion in the name of liberty and its ancient institutions. -Niccolo Machiavelli
-
fugi
-
- Posts: 70
- Joined: 30 Dec 2004 15:46
- Location: austin, tx
-
Return to Pick-Fu [Intermediate Skill Level]
Who is online
Users browsing this forum: No registered users and 1 guest
|